An Easy Way to Build the Perfect Trailer for Moving Plants.

No matter what kind of work you are doing in your yard or in your backyard nursery it’s always nice to have an easy way to move things around. Our biggest challenge at Mike’s Plant Farm is being about to safely move our freshly potted plants from the potting area to the area in the nursery where they will grow out and be sold.

My old neighbor was moving and asked if I wanted to buy a garden trailer of $20.00. I said sure! Why not, the tires and wheels are worth way more than twenty bucks!

Originally this trailer had a dump option so the first thing I did was drill a hole and insert a bolt so it could no long dump. That would take all the fun out moving a bunch of freshly potted plants!

My goal was to increase the capacity, the amount of potted plants that we could fit on the deck without double stacking. I know that this deck now holds 72 plants, pretty sure that’s 72 one gallons. We often use a pot that is a bit smaller than a one gallon so I don’t know for sure which size pot actually fits 72. But I’m pretty sure it’s the trade one gallon.

All I did was cut the end off of a sheet of 3/4″ treated plywood, attach two by fours around the edge so the plants can fall off. Then put some angle brackets in the corners of the two by fours to make sure they stayed put. And no, the plants do not bounce off the trailer as long as you don’t drive like a maniac.

Because I made the deck so much longer I had to extend the tongue of the trailer so we had enough room between the deck and the four wheeler to actually turn the trailer. To do that I simple took two pieces of one inch angle iron, bolt them on the inside of the existing tongue of the trailer, then I laid a couple of pieces of metal across the angle iron for support and welded them into place. I drilled a hole large enough for the hitch pin and welded another bracket over that hole to make the hitch assembly.

The dimensions of the deck surface are 41 inches by 69 inches. Hopefully I’ll remember to get a photo of it full of plants. We probably have that in another post of video. All of our videos over the years can be found here.

It’s important when attaching the deck to the existing trailer to make sure it is pretty well balanced with a tad more weight on the tongue end of the trailer so you can load the trailer when not attached to the pull vehicle. It also makes it really easy to move around empty when you need to.

Questions, comments, mean things to say? Post them below and I will respond.